* Hidden Fastener, Ipe Clip® Kit box variations are easily ordered with any type of deck screw we carry as well as, can be ordered in variants of 100 count and 175 count. Mix up decking screws for diverse lengths, colors and styles.
*Short version shown above
Tall version = .375" (9,525 mm)
|Material||Stainless Steel Insert||Available Color|
|Polyethylene / Fiberglass||N/A|
|Air-Dried Decking||Kiln-Dried Decking||Composite / PVC Decking|
The method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to contract.
Running screws straight down with composite/PVC decking allows these materials to naturally move on their length.
|Board Thickness||Board Width|
|A* = Measurement Of Your Decking||B** = Measurement Of Your Decking|
|Thickness of Cut||Cutting Height||Cutting Depth|
|C = 5/32" (4mm)||D*** = (A-5/32")/2||E = 1/2" (13mm)|
|F**** =3/32" (2,4mm)|
* If using 1-1/2" (38,1mm) or thicker material, you may need to upgrade to a longer screw option than what is typically packaged with the fastening kit.
** For decking 8" (20,32cm) or wider, the (A) dimension should be at least 1-1/2" (38,1mm). Using a wide plank such as this for surface decking will most likely cause cupping issues regardless of how the material is fastened if thicker material is not used.
*** This formula will create a symmetrical profile that allows you to flip and/or rotate the decking to be able to put the best side up.
**** Fastener automatically achieves correct gap spacing when boards are pushed tight during installation.
Ipe Clip® Invisible Deck Fastener Kits come in combinations of 100 (50 sq. ft.) count pieces and 175 (100 sq. ft.) complete count. Likewise, easily mix different deck screw styles, color and length to suit your needs.
EXTREME® Ipe Clip® Series - U.S. Patent Numbers 8,464,488 and 8,806,829.
Original, “round”, STANDARD Ipe Clip® - U.S. Patent No. D470,039.